ELECTRICA
Original Articles

Ultra Wideband High-Efficiency High-Power Amplifier Design by Simplified Output Matching Technique

1.

İstanbul Technical University, Electrical and Electronics Engineering Faculty, İstanbul, Türkiye

2.

TÜBİTAK National Metrology Institute, R&D Support and Information Systems, Kocaeli, Türkiye

ELECTRICA 2024; 24: 755-766
DOI: 10.5152/electrica.2024.24134
Read: 148 Downloads: 79 Published: 01 November 2024

Abstract
This paper presents the design of a Gallium Nitride (GaN) transistor-based ultra-wideband (UWB) high-efficiency power amplifier (PA) with 25W (44 dBm) output power operating in the 2–6 GHz frequency band. The design of the matching circuits is based on a simplified systematic approach utilizing the target impedance trajectory. The Macom CGHV1F025S model GaN transistor and Rogers RT5870 model substrate are used in the design. The experimental results show that performance of the implemented PA offers 9.8 dB power gain, 43.8 dBm output power, and power-added efficiency (PAE) between 41% and 57% in the 2–6 GHz band.

Cite this article as: E. Çağdaş, O. Kızılbey, and M. Yazgı, "Ultra wideband high efficiency high power amplifier design by simplified output matching technique," Electrica, 24(3), 755-766, 2024.

Files
EISSN 2619-9831