Original Article

Reliability Analysis of Al2O3/Epoxy Nanocomposites Under Surface Tracking Degradation

Volume 26 Publish Date: March 30, 2026
Full Text PDF
DOI
Kaan Kırkağaç ORCID
Department of Electrical-Electronic Engineering, Istanbul University-Cerrahpaşa Faculty of Engineering, İstanbul, Türkiye
Nadir Subaşı ORCID
Department of Computer Programming, Kırklareli University Vocational School, Kırklareli, Türkiye
Ertuğrul Adıgüzel ORCID
Department of Electrical-Electronic Engineering, Istanbul University-Cerrahpaşa Faculty of Engineering, İstanbul, Türkiye
Kırkağaç, K., Subaşı, N., & Adıgüzel, E. (2026). Reliability Analysis of Al2O3/Epoxy Nanocomposites Under Surface Tracking Degradation. ELECTRICA, 26, 1–10. https://doi.org/10.5152/electrica.2026.26017
Full Text Full-Text PDF

Abstract

Surface tracking resistance and long-term reliability are critical performance parameters for polymeric insulation materials used in high-voltage electrical applications. In this study, the tracking behavior of epoxy/aluminum oxide (Al2O3) nanocomposites was experimentally, statistically, and data-driven investigated under high electrical stress conditions. Epoxy composites containing 0, 1, 3, and 5 wt.% Al2O3 nanoparticles were fabricated and tested according to the International Electrotechnical Commission(IEC) 60112 standard at applied voltage levels of 400 V, 500 V, and 600 V, with repeated experiments conducted to ensure statistical consistency. The results demonstrated that Al2O3 incorporation significantly influences tracking resistance in a concentration-and voltage-dependent manner, where the composite containing 1 wt.% Al2O3 exhibited the highest tracking resistance at moderate voltage levels (400–500 V), achieving higher drop-to-failure values (defined as the number of contaminant droplets required to cause sustained surface tracking for more than 2 seconds or material burn-through, in accordance with IEC 60112) than pure epoxy. However, increasing the filler content beyond 1 wt.% led to a reduction in tracking lifetime, particularly under high electrical stress, which was associated with increased surface erosion and localized degradation. The degradation behavior at 600 V was further analyzed using two-parameter Weibull statistics, revealing a decrease in characteristic life with increasing Al2O3 content, while the 1 wt.% Al2O3 composite exhibited the highest Weibull shape parameter, indicating a stable and predictable wear-out dominated failure mechanism. In addition, machine learning models were developed to predict tracking lifetime with high accuracy (R2 > 98%), and feature importance analysis identified erosion-related mass loss, filler content, and applied voltage as the dominant parameters governing tracking degradation. Overall, the strong agreement between experimental results, Weibull reliability analysis, and machine learning predictions provides a combined experimental and data-driven framework for evaluating and optimizing epoxy-based insulation materials for high-voltage applications.

Cite this article as: K. Kırkağaç, N. Subaşı and E. Adıgüzel, “Reliability analysis of Al2O3/epoxy nanocomposites under surface tracking degradation,” Electrica, 26, 0017, doi: 10.5152/electrica.2026.26017.

 

Article Info
Published In
Journal ELECTRICA
Volume / Issue Volume 26
Pages 1-10
History
Published Online March 30, 2026
Affiliations
Kaan Kırkağaç ORCID
Department of Electrical-Electronic Engineering, Istanbul University-Cerrahpaşa Faculty of Engineering, İstanbul, Türkiye
Nadir Subaşı ORCID
Department of Computer Programming, Kırklareli University Vocational School, Kırklareli, Türkiye
Ertuğrul Adıgüzel ORCID
Department of Electrical-Electronic Engineering, Istanbul University-Cerrahpaşa Faculty of Engineering, İstanbul, Türkiye
Cite this Article
Kırkağaç, K., Subaşı, N., & Adıgüzel, E. (2026). Reliability Analysis of Al2O3/Epoxy Nanocomposites Under Surface Tracking Degradation. ELECTRICA, 26, 1–10. https://doi.org/10.5152/electrica.2026.26017
Share
Outlines